Comparative study of the physico-chemical parameters of the coastal waters in rivers Matla and Saptamukhi: Impacts of coastal water coastal pollution

A qualitative and quantitative research has been performed on the physico-chemical parameters of the neighboring coastal waters of the rivers Matla and Saptamukhi in the Sunderban district, West Bengal. The distribution pattern of eight physico-chemical parameters, namely pH, salinity, dissolved oxygen, suspended solids, nitrogen and phosphorus concentrations (inorganic and total) has been graphed and compared for the two rivers over a time period of ten years (??90s decade). A statistical analysis has been carried out and the correlation data between these parameters has been rationalized based on both natural and man-made activities during that time. This has pointed to various causes behind coastal pollution of river waters. The changes in water quality have been related to flood impacts, storm surge, eutrophication, domestic sewage, agricultural and industrial wastes. In order to avoid coastal degradation and maintain environmental balance, it is very important to understand the impact of these parameters on coastal zones.     

Multifunctional glow discharge analyzer for spacecraft monitoring

In this study the main objective was to develop and demonstrate a glow discharge microplasma coupled to a miniature spectrometer for detection of fire signatures from pyrolyzing and burning spacecraft materials. Our experimental results demonstrate that combustion-produced carbonaceous aerosols can serve to identify the burning materials. Demonstrating versatility for chemistry analysis, the plasma detector could differentiate carbonaceous aerosols with different C/H ratios and distinguish inorganic samples such as salts and metal oxides from carbonaceous aerosols. In addition, in situ analysis of aerosol samples validated the microplasma’s analytical utility by linearity of its optical emission intensity with aerosol elemental composition.     

Investigation of organic n-type field-effect transistor performance on the polymeric gate dielectrics

We report a copper hexadecafluorophthalocyanine (F₁₆CuPc) based n-type organic field-effect transistor (OFET) with polymeric gate dielectrics with different physical/electrical properties. The gate dielectrics are four types of cross-linked poly(4-vinylphenol) and newly prepared poly(4-phenoxy methyl styrene) and those are characterized based on surface tension, leakage current and capacitance. The performance of F₁₆CuPc OFETs with those gate dielectrics was compared. We found that the composition of the gate dielectrics and the interfacial interaction of F₁₆CuPc with the gate dielectric play a decisive role in the performance of OFETs. The effect of physical/electrical properties, composition and processing condition of the gate dielectrics on the device performance was investigated.     

Swelling behaviour of a geofiber-reinforced expansive soil

This paper reports the results of laboratory study performed on expansive soil reinforced with geofibers and demonstrates that discrete and randomly distributed geofibers are useful in restraining the swelling tendency of expansive soils. Swelling characteristics of remoulded expansive soil specimens reinforced with varying fiber content (f = 0.25% and 0.50%) and aspect ratio (l/b = 15, 30 and 45) were studied. One-dimensional swell-consolidation tests were conducted on oedometer specimens. Reduction in heave and swelling pressure was the maximum at low aspect ratios at both the fiber contents of 0.25% and 0.50%. Finally, the mechanism by which discrete and randomly distributed fibers restrain swelling of expansive soil is explained with the help of soil–fiber interaction.     

Si/SiC-based DD hetero-structure IMPATTs as MM-wave power-source: a generalized large-signal analysis

A full-scale, self-consistent, non-linear, large-signal model of double-drift hetero-structure IMPATT diode with general doping profile is derived. This newly developed model, for the first time, has been used to analyze the large-signal characteristics of hexagonal SiC-based double-drift IMPATT diode. Considering the fabrication feasibility, the authors have studied the large-signal characteristics of Si/SiC-based hetero-structure devices. Under small-voltage modulation (～ 2%, i.e. small-signal conditions) results are in good agreement with calculations done using a linearised small-signal model. The large-signal values of the diode's negative conductance (5 × 10⁶S/m²), susceptance (10.4 × 10⁷ S/m^2}), average breakdown voltage (207.6 V), and power generating efficiency (15%, RF power: 25.0 W at 94 GHz) are obtained as a function of oscillation amplitude (50% of DC breakdown voltage) for a fixed average current density. The large-signal calculations exhibit power and efficiency saturation for large-signal (> 50%) voltage modulation and thereafter decrease gradually with further increasing voltage-modulation. This generalized large-signal formulation is applicable for all types of IMPATT structures with distributed and narrow avalanche zones. The simulator is made more realistic by incorporating the space-charge effects, realistic field and temperature dependent material parameters in Si and SiC. The electric field snap-shots and the large-signal impedance and admittance of the diode with current excitation are expressed in closed loop form. This study will act as a guide for researchers to fabricate a high-power Si/SiC-based IMPATT for possible application in high-power MM-wave communication systems.     

Numerical Modeling of Ti Deformation for the Development of a Titanium and Stainless Steel Transition Joint

Finite element analysis (FEA) was used to model the joining of titanium grade 2 (Ti) to AISI 321 stainless steel (SS) transition joint of lap configuration with grooves at the interface on SS side. The hot forming of Ti for filling the grooves without defects was simulated. FEA involving large plastic flow with sticking friction condition was initially validated using compression test on cylindrical specimen at 900 °C. The barreled shape and a no-deformation zone in the sample predicted by FEA matched with those of the compression experiments. For the joining process, FEA computed the distribution of strain and hydrostatic stress in Ti and the minimum ram load required for a defect-free joint. The hot forming parameters for Ti to fill the grooves without defects and any geometrical distortion of the die were found to be 0.001 s^?1 at 900 °C. Using these conditions a defect-free Ti-SS joint was experimentally produced.     

Adsorption‐concentration polarization model for ultrafiltration in mixed matrix membrane

Adsorption has been found to be significant in ultrafiltration by mixed matrix membrane. Removal of very low molecular weight solutes compared to the molecular weight cut off of the membrane is facilitated by adsorption. The modeling of the adsorption coupled with concentration polarization is presented based on the mathematical approach developed by Gekas et al. (Gekas et al. Chem Eng Sci. 1993;48:2753–2765), from the first principles. However, extensive modifications were included in theoretical development including those suggested by Ruiz‐Bevia et al. (Ruiz‐Bevia et al. Chem Eng Sci. 1997;52:2343–2352). The developed model captured the rejection dynamics with the help of retention factor. The model equations were solved under the framework of boundary layer analysis, using the integral approach. Effects of the adsorption isotherm and the different parameters affecting the system performance were also investigated. Further, experimental validation of the model results with two different mixed matrix ultrafiltration studies was also elucidated. © 2014 American Institute of Chemical Engineers AIChE J, 60: 2354–2364, 2014